Product

GM100M Series

GM-100M Area Alarm actively displays your medical gas information on a highly visible TFT LCD screen.

It is capable of handling up to 8 gases, 14 relay inputs, 7 relay outputs and 2 analog outputs in one alarm covering all needs of hospital alarm and monitoring needs.

  • On-site customization without the use of a laptop, tablet, or mobile device.
  • 10” Touch Screen Display with Password protected interface
  • Can be used as an area alarm, master or combination alarm.
  • Full networking capabilities out of the box including Modbus RTU/TCP, UDP protocols.
  • Can be integrated with SCADA system or BMS systems
  • Circuitry protection and detection, if the transducer is not connected at all or not to the appropriate gas display, an error message (No Sensors) will be displayed.
  • The alarm system allows users to have optional relay outputs according to single or multiple alarm conditions.
  • Transducers can be mounted locally or remotely utilizing shielded twisted pair wiring up to 100 ft. (30.5 m)
  • Gas specific DISS fitting to ensure that the transducer is connected to its corresponding gas.
  • Event Log to view history of time stamped alarm events

Many Applications in One Device with Different Setup and Accessories

1~8 gas area alarm
master alarm
combo alarm
flow rate and accumulation
compressor and vacuum pump
manifold
Liquid Tank
combo alarm

CA 097/156 Series

CA 097/156 Central Alarm actively displays, control, and sets your on-site alarms on a highly visible TFT LCD screen.

It is capable of handling up to 90 on-site alarms covering all needs of remote control requirements.

  • Users can set the name of each on-site alarm in the central alarm on the fly, and can modify the alarm parameters and
    connection parameters of each on-site alarm through the network connection, without using additional devices.
  • The central alarm can display the on-site alarm status including on-site alarm, on-site mute, and communication error.
  • Using Modbus-TCP, it can be integrated with the SCADS to provide on-site alarm, central alarm, and itself data.
  • It can cascade another central alarm in the same area network.
  • It can remotely display, switch and control the existing screens and buttons of the on-site alarm, and set
    the existing parameters of the on-site alarm, too.
  • It has an event table, which is used to view up to 10,000 historical records of alarm events with time stamps.
  • The offline function can be set to ensure that the alarm is suspended during the on-site alarm repair, room decoration, or network rebuild to cause abnormal communication.

Fit All Requirements for Your System Scale and Budget

CA 097_10
CA 097_21
CA 097_30
CA 156_40
CA 156_60
CA 156_90

GM 07XM Series

GM 07XM series give a new life of BAA-L series for retrofit

No wall construction required

A Lot of Options for Your Needs

GM 070M-V-O
GM 070M-V-OV
GM 070M-H-O
GM 070M-H-OV
GM 071M-O
GM 071M-OV
GM 071M-OVA
GM 071M-OVAN
GM 071M-OVANC
Easy to use
High Preformance
Hospital Application
Industrial Application